Injection workshop centralized feeding system

 Is designed for injection molding plant plastic products, to achieve a continuous unmanned continuous molding operations. According to the need to change the variety of raw materials, multi-color materials, the combination of use, to achieve the color process automation.


What is the injection workshop centralized feeding system

Injection molding workshop forming central feeding system system works with the central dehumidification drying system can be used to dehumidification drying cycle after the transport pipeline will be cleaned to ensure that there is no residual pellet in the pipeline, to avoid the return of raw materials at the same time, But also to ensure that the injection molding machine in the consistency of the performance of raw materials. In the vacuum under the action of raw materials in the original dust will be filtered through the dust filter system, help to improve the quality of molding products.


Injection workshop centralized feeding system composed of fans, branch stations, dry hopper,
Central console, cyclone dust collector, high efficiency filter, electric eye hopper, wind interceptor valve, cut off the valve. Dehumidifier, election material rack, micro-hopper.

The centralized feeding system of the injection molding plant is capable of regenerating and using the raw material in a fully automatic manner, capable of controlling all the feeding equipment and preventing the occurrence of obstruction in the storage bin, and by providing the central monitoring station to be fully automated.





Injection molding plant centralized feeding system to avoid the return of raw materials at the same time also ensure that the injection molding machine in the consistency of raw materials, which with the central dryer (dehumidifier) system can be used to dry air on the raw materials to dry again to prevent dry plastic resurgence , At the same time in each transport cycle after the pipeline to clean up to ensure that there is no residue in the pipeline.
In the vacuum negative pressure with the role of the original material in the dust through the filter (dust collector) system filter out, favorable to improve product quality. Design process raw materials → storage → measurement → drying → transport → use
Using a machine a tube, sealed circuit design, to ensure the stability of the entire system, no plastic resurgence, blocking material phenomenon occurred.
Fast feeding station (sub-Qi station) Features:
The branching station is made up of several branches, and the same raw material for the sub-bleed pipe can be used for the injection molding machine machine, each with quick head tightness; can improve the system efficiency, easy to change material.
Central feed system built-in introduction
Central console features:
Using PLC and large size 10.4-inch color man-machine interface touch panel, easy to understand, good operation;
Color display a variety of settings, operation and operation of the situation;
With a tube to clear the tube, automatic dust collection center for the host A, B alternately automatic switching and artificial selection of anti-error function;
The addition of raw material control screen, the monitoring of the use of raw materials, suction, lack of materials and the central host (motor) a variety of anomalies. Central feed host features:Injection workshop centralized feeding system
1, for the host two A, B alternately, and there are automatic switching valve design to ensure that the stability of raw materials delivery.
Automatic reversal whirlpool dust collector Features:
2, the motor does not stop the design, in order to avoid frequent motor start, resulting in wear and tear;
3, with safety relief valve, when the host movement pressure is too large, the safety set value overload, release valve fully release pressure to protect the motor
1, the air filter and cyclone dust collector design, natural centrifugal force to collect dust and dust;
2, can be attached to high pressure gas tank, automatic cleaning filter;
3, dust collector installed wind pump, can be effective in the non-stop, mobile dust collector dust.

Injection workshop centralized feeding system

Injection Plant The centralized feed system uses vacuum transport to transport plastic raw materials from the storage tank to the central dehumidification drying system through a centralized piping system and then transport the dried raw materials to each injection molding machine. Central feeding system using "a machine a tube" design, to ensure that the entire system of air to transport raw materials to prevent dehumidification after drying raw materials resurgence. At the same time in each transport line is stable, no blocking material phenomenon occurred.

Characteristics of Centralized Feeding System in Injection
Efficient injection molding workshop forming Central feeding system can be achieved by a variety of raw materials automatically supply to the multi-room arbitrary injection molding processing equipment used, which may include the drying of raw materials, color processing, and the proportion of the use of crushed recycled materials, to implement A high degree of automation control, monitoring, etc., and to meet the 24-hour non-stop production needs.
Energy-saving injection molding plant forming central feeding system system is simple, only a few people can control the entire injection plant supply demand, thereby reducing the large number of labor costs. Second, the reduction in the injection molding machine next to the raw material and the corresponding auxiliary equipment, improve the utilization of space. In addition, due to the use of the central way of supply, corresponding to reduce a lot of stand-alone equipment, also saves energy and reduce maintenance costs.
Injection workshop centralized feeding system
Personalized injection molding workshop centralized feeding system can be used to different users, different workshop characteristics, different requirements for the use of raw materials. Can be designed according to the actual needs of the optimal solution.
Four modern factory image injection workshop centralized feeding system will make raw materials and dust on the injection molding production to minimize the level of pollution, which can maintain a clean production workshop, and the central feeding system unique concentration of dust recovery system, clean more convenient, Environmental protection effect is to reach 100,000 clean room operating requirements standards, and reduce noise, and ultimately can achieve unmanned automated production workshop, and establish a modern factory management image.